1c0='150;150;255;0' | | c1 | int[4] | sensors subId | 0;0;255;15 | On-start color in format 'red;green;blue;blink'red, green, blue – 0..255; blink: • 0 – pulse • 1 – blink per 2 seconds • 2 – blink per second • 15 – constant glow Example:

1c1='150;150;255;0' | | c2 | int[4] | sensors subId | 255;100;0;15 | 'Leak was previously reported' color in format 'red;green;blue;blink'red, green, blue – 0..255; blink: • 0 – pulse • 1 – blink per 2 seconds • 2 – blink per second • 15 – constant glow Example:

1c2='150;150;255;0' | | c3 | int[4] | sensors subId | 255;0;0;15 | On-leak color in format 'red;green;blue;blink'red, green, blue – 0..255; blink: • 0 – pulse • 1 – blink per 2 seconds • 2 – blink per second • 15 – constant glow Example:

1c3='150;150;255;0' | | sens | int | sensors subId | 128 | Sensor sensitivity – 1..255Example:

1sens='180' | | test | int(0,1) | sensors subId | 1 | 0 - Disable the test signal to detect the presence of the sensor |

<aside> ⚠️ De hierboven ingestelde waarden worden bij het loskoppelen van de sensor niet automatisch gereset naar hun standaardwaarde. Je dient ze dus zelf handmatig terug te zetten naar de standaardwaarden via ‘Configuratie hardware’ in de LT Setup.

</aside>

Datum laatste update: 26-02-2026